TANK GP-HYDRAULIC & FUEL 2112881 - Caterpillar

The screed extender must be extended to allow access for removal of two of the nuts that hold the deflector plates to the main screed assembly. The right hand plate overlaps the left hand plate and must be removed first.2. On the 8-16B screed, remove 16 nuts and washers (1). On the 10-20B and 10-20WB screed, remove twenty nuts (1) and washers. 3. Remove right hand and left hand deflector plate (2). 4. Remove twelve nuts (3) and washers (back row of nuts). When installing, apply 5P-3931 Anti-Seize Compound on the nuts. 5. Remove twelve nuts (4) and washers. When installing, apply 5P-3931 Anti-Seize Compound on the nuts.6. Start the engine. Raise the screed from screed plate (5). Move the machine FORWARD and away from the screed plate. Stop the engine. If any of the studs are removed, apply 4C-9507 Compound to the studs before installing. For installation of the main screed plate, reverse the removal steps.