TANK GP 2239170 - Caterpillar

Illustration 50 g06116811
(1) 445-4990 Control Valve Gp
(36) 148-8335 Connector As
(43) 494-9504 Tube As
(44) 494-9503 Tube As
Connect tube assembly (43) and tube assembly (44) to control valve group (1) with connector assembly (36).
Illustration 51 g06335991
(41) 494-9501 Tube As
(42) 494-9502 Tube As
(43) 494-9504 Tube As
(44) 494-9503 Tube As
(47) 8T-4121 Hard Washer
(51) 8T-4136 Bolt
(52) 7X-7729 Washer
(53) 344-5675 Nut
(54) 8T-4182 Bolt
(55) 498-8732 Bracket
(56) 498-8532 Plate As
(57) 8C-3206 Half Flange
(58) 4J-0520 O-Ring Seal
(59) 8T-4196 Bolt
(60) 355-3675 Hose As
(B) 355-3706 Hose As
Attach tube assembly (41) and tube assembly (42) onto the machine using plate assembly (56), bracket (55), eight bolts (51), sixteen washers (47), four nuts (53), and four bolts (54).
For 950M & 962M Standard Lift machines use hose assembly (60) and For 950M & 962M High Lift machines use hose assembly (B). Connect hose onto tube assembly (41) and tube assembly (42) using two O-ring seals (56), four half flanges (55), eight bolts (57), and eight hard washers (45).
Illustration 52 g06319810
Standard Lift (Left Image)
High Lift (Right Image)
(3) 5P-1076 Hard Washer
(6) 8T-4184 Bolt
(8) 8T-4223 Hard Washer
(21) 8T-4139 Bolt
(47) 8T-4121 Hard Washer
(51) 8T-4136 Bolt
(52) 7X-7729 Washer
(57) 8C-3206 Half Flange
(59) 8T-4196 Bolt
(61) 378-9112 Block
(62) 8T-7934 Hard Washer
(63) 349-8793 Bracket - for 950M Standard Lift
(64) 427-0356 Tube As - for 950M Standard Lift
(65) 427-0357 Tube As- for 962M Standard Lift
(66) 358-2372 Bracket As
(67) 7Y-2522 Plate
(68) 349-8798 Bracket - For 962 Standard and 950/962 High Lift
(69) 6V-1616 Half Clamp
(70) 1S-4305 Spacer
(71) 5H-4019 Cover
(A) 427-0358 Tube As
(B) 355-3706 Hose As
Assemble two brackets onto cross member using four hard washers (52) and four bolts (51).
For 950M Standard Lift Machines use bracket (63)
For 962M Standard Lift, 950M High Lift, and 962M High Lift use bracket (68)Assemble two bracket as (66) onto the lift arms using washer (3) and bolt (21).
Assemble Tube As to Top Bracket using washer (62) and bolt (51). Assemble Tube As to Bottom Bracket using clip (69), spacer (70), washer (8), and bolt (6).
For 950M Standard Lift Machines use Tube As (64)
For 962M Standard Lift Machines use Tube As (65)
For 950M and 962M High Lift Machines use Tube As (A)
Connect Hose Assembly (60) or (B) to Tube Assembly using half flange (57), washer (47), and bolt (59). Install cover (71) to tube assembly using half flange (57), washer (47), and bolt (59).
Illustration 53 g06116828
(48) 503-2637 Front Guard
(49) 134-5245 Bolt
(50) 505-7955 Hard Washer
(51) 8T-4136 Bolt
(52) 7X-7729 Washer
Fix front guard (48) and secure using five bolts (49), five hard washers (50), ten bolts (51), and ten washers (52).Software Configuration
Note: This machine feature can be configured and must be activated with product software programming system or service tool.
Use Caterpillar Electronic Technician (CAT ET) and select the Implement Electronic Control Module (ECM).
Select "Service" from the menu.
Select "Configuration" from the menu.
Double-click the desired feature on the "Configuration" screen to change.
Enable the "Configuration" to "4 - Function Lever Control" and calibrate the valve and controllers in the cab.