TANK AS-WATER 2430796 - Caterpillar

Bucket Dump (7) - Move the joystick to this position in order to dump the bucket or the work tool.
Boom Raise (8) - Move the joystick to this position in order to raise the boom.
Bucket Close (9) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Alternate Joystick Control (Backhoe Control)
Illustration 3 g01450759
Boom Lower (11) - Move the joystick to this position in order to lower the boom.
Swing Right (12) - Move the joystick to this position in order to swing the upper structure to the right.
Boom Raise (13) - Move the joystick to this position in order to raise the boom.
Swing Left (14) - Move the joystick to this position in order to swing the upper structure to the left. HOLD (15) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
Illustration 4 g01450761
Stick Out (16) - Move the joystick to this position in order to move the stick outward.
Bucket Dump (17) - Move the joystick to this position in order to dump the bucket or the work tool.
Stick In (18) - Move the joystick to this position in order to move the stick inward.
Bucket Close (19) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (20) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Manual Kick Down Button
Illustration 5 g01450308
The manual kick down feature allows the operator to reduce the engine speed to low idle by pressing the manual kick down button. The engine speed will be reduced to low idle if the following conditions occur:
The hydraulic implement is at idle and the auxiliary is at idle.
The transmission is in the NEUTRAL position.
The throttle control is set above low idle.Once this feature is active, the Automatic Engine Speed Control indicator will illuminate. The operator can increase the engine speed to the throttle setting by doing any of the following:
Pressing the manual kick down button.
Moving the throttle control to low idle.
Moving the implement joystick or moving the thumb roller.Horn
Illustration 6 g01450779
Horn - Press the button in order to sound the horn. Use the horn for alerting personnel or for signaling personnel.