TANK AS-HYDRAULIC 2435107 - Caterpillar

Right Hand Trigger - Pull the trigger and hold the trigger on the right hand joystick in order to provide electrical power to pin (B). Release the trigger in order to deactivate the control.Continuous Flow Control
Continuous Flow - The continuous flow control supplies continuous flow of hydraulic fluid to the auxiliary hydraulic circuit without continuously holding the auxiliary hydraulic control. Press one of the two auxiliary hydraulic switches that are located on the right side joystick. Press the continuous flow switch on the left hand joystick and release the continuous flow switch. Immediately release the auxiliary hydraulic switch after you release the continuous flow switch. The continuous flow function will be activated if the operator releases the auxiliary hydraulic switch within one second of releasing the continuous flow switch. Press on either the auxiliary hydraulic control or the continuous flow switch in order to stop the flow to the auxiliary circuit.Dedicated Dual Direction Control Kit
Note: The following illustrations reflect the operation of the joysticks when the machine is equipped with a Dedicated Dual Direction Control Kit. The Dedicated Dual Direction Control Kit changes the control of the work tool and the movement of the machine. The other functions of the joysticks are not affected by the Dedicated Dual Direction Control Kit. The Dedicated Dual Direction Control Kit may be used with standard joysticks or optional joysticks.
Illustration 10 g01112348
Instruction Decals A - Instruction Decal for Left Hand Dual Direction Control Joystick and Instruction Decal for Right Hand Dual Direction Control Joystick
Illustration 11 g01112448
Instruction Decals B - Instruction Decal for Left Hand Dual Direction Control Joystick and Instruction Decal for Right Hand Dual Direction Control Joystick
Illustration 12 g01112451
Instruction Decals C - Instruction Decal for Left Hand Dual Direction Control Joystick and Instruction Decal for Right Hand Dual Direction Control Joystick with Thumb Wheel
Forward
Forward - Push both joysticks forward in order to move the machine forward.Reverse
Reverse - Pull both joysticks backward in order to move the machine backward.Right Turn
Push the left joystick forward in order to turn the machine to the right.Push the left joystick forward and pull the right joystick backward in order to rapidly turn the machine to the right.Left Turn
Push the right joystick forward in order to turn the machine to the left.Push the right joystick forward and pull the left joystick backward in order to rapidly turn the machine to the left.Float
Float - Move the joystick to the right into the detent in order for the bucket to follow the contour of the ground.Lower
Lower - Move the joystick to the right in order to lower the bucket.Raise
Raise - Move the joystick to the left in order to raise the bucket.Dump
Dump - Move the joystick to the right in order to tilt the bucket downward.Tilt Back
Tilt Back - Move the joystick to the left in order to tilt the bucket upward.