TANK-RADIATOR 2504464 - Caterpillar

(1) Torque for the three bolts ... 30 7 N m ... (22 5 lb ft)(2) Torque for the six bolts ... 270 40 N m ... (200 30 lb ft)(3) Torque for the two bolts ... 105 20 N m ... (75 15 lb ft)(4) Tighten the ten bolts (after the correct amount of shims have been installed between the retainer and the spindle) to a torque of 125 20 N m (90 15 lb ft) and then turn an additional 120 10 degrees.(5) Inside diameter of the planetary gear ... 86.068 +0.020 -0.008 mm ... (3.3885 +.008 -.0003 inch)(6) Diameter of the planetary shaft ... 52.316 0.008 mm ... (2.0597 .0003 inch)(7) Rubber toric seals and all surfaces that contact the toric seals must be clean and dry when the parts are assembled. Apply a thin coat of oil on the contact surfaces of the metal seals prior to installing the metal seals. The metal seals must be assembled square with the bore. The rubber toric seals must not bulge and the rubber toric seals must not be twisted.