TANK AS 2635632 - Caterpillar

2635632 TANK AS Caterpillar parts C4.4

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2635632
263-5632
2635632

Weight: 14 pounds 6 kg.

Buy TANK AS 2635632 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

This part in 1 request: Show. This information for suppliers only!

#1387872 2635632

2024-07-11

Compatible equipment models: 2635632:

GENERATOR SET C4.4 Caterpillar

Number on catalog scheme: 1

Caterpillar 2635632 Parts scheme TANK AS

For full view, you need register

Information:

Illustration 21 g00282878This safety message is located on the cover assembly of the front suspension cylinders.
Illustration 22 g00425862
Removal of this cover or valves will cause truck to drop suddenly if not properly blocked. Serious injury or death could result if person is trapped between tire and platform or fender.
Crankcase Covers
Illustration 23 g00481743This safety message is located on the engine valve cover.
Illustration 24 g00123185
Flash fire may result in personal injury, if crankcase covers are removed within fifteen minutes after emergency shut down.Do not restart engine until cause for shut down has been corrected.
Unit Injectors
Illustration 25 g00481745This safety message is located on the valve cover and on the Electronic Control Module (ECM).
Illustration 26 g00103125
Electrical shock hazard. The electronic unit injector system uses 90-120 volts.
The ECM sends a high voltage signal to the unit injectors. To help prevent personal injury, disconnect the unit injector connector. Do not come in contact with the harness connector for the unit injector while the engine is operating.Engine Lifting
Illustration 27 g00445092This safety message is located on the engine valve cover.
Illustration 28 g00306083
Improper lift rigging can allow unit to tumble causing injury and damage.
Use proper spreader bar as shown.
Remove front turbo support channel assembly.
Attach two proper cables to spreader bar from engine lifting eye.
Remove after cooler water lines if lifting apparatus interferes.
If improper equipment is used to lift the engine, injury and damage can occur. Use cables that are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.Engine Coolant
Illustration 29 g01037537This label is located beside each radiator filler cap.
Illustration 30 g00782457
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.