TANK AS.- 2774836 - Caterpillar

Typical Illustration(1) Apply 9S-3263 Thread Lock Compound to the last 10 mm (.4 inch) of thread at the base end of the studs prior to assembly. Torque for the center studs under the filter base ... 80 15 N m (60 11 lb ft)(2) 4N-8150 Spring for the filter bypass valveLength under test force ... 55.25 mm ... (2.175 inch)Test force ... 76 6 N (17.0 1.3 lb)Free length after test ... 93.7 mm (3.69 inch)Outside diameter ... 20.6 mm (0.81 inch)Pressure difference to open the filter bypass valve ... 250 21 kPa (36 3 psi)(3) Apply 5P-3413 Pipe Sealant to the plug threads before installation.(4) Put engine oil on the filter seal. Put filter (4) in position and tighten until the seal makes contact with the base. Turn the filter an additional 270 degrees (3/4 turn).Oil Cooler Bypass Valve
(1) 4N-8150 Spring for the oil cooler bypass valveLength under test force ... 55.25 mm ... (2.175 inch)Test force ... 76 76 6 N (17.0 1.3 lb)Free length after test ... 93.7 mm (3.69 inch)Outside diameter ... 20.6 mm (0.81 inch)Pressure difference to open the oil cooler bypass valve ... 250 21 kPa (36 3 psi)