TANK GP-COOLANT 3375252 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
615C II 9XG01700-01715, 1717-2004, 2006-2110
PARTS NEEDED
Qty
Part Number Description
6 8T6871 BOLT
6 1984780 WASHER-HARD
2 3128843 RING
In Order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-3000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
3001-5000 hrs,
37-60 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 3.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Perform the rework steps on one side of the elevator at a time. The elevator frame can be reworked in the bowl.
1) Remove the existing 6G5982 Ring and the hardware attached to it on both sides of the elevator assembly. They will be replaced in the last step with new parts.
Image1.1.1
2) The (6) threaded holes on the elevator frame need to be tapped deeper for the new hardware. Extend the threads 5mm deeper into pin that is welded on the elevator frame by using a 5/8-11-2B tap and running the threads to a total depth of 34mm from the surface of the pin. The existing threaded holes do not need to be drilled any deeper.
Image1.2.1
3) Install the new (2) 312-8843 Rings, (6) 198-4780 Washer-Hard, and (6) 8T6871 Bolts.