TANK AS-WINDOW WASHER 3465168 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 138-7573 Link Brackets 3 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Fuel Tank (Center)
Illustration 1 g01412666
Illustration 2 g01412672
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (6). The weight of fuel tank (6) is approximately 272 kg (600 lb). Install fuel tank (6). Install bolts (7).
Illustration 3 g01412662
Illustration 4 g01412663
Connect hoses (4) and (5).
Illustration 5 g01412660
Position hose assemblies (3). Connect hose assembly (2). Install clips (1).
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities". Fuel Tanks (Left and Right)
Illustration 6 g01412643
Illustration 7 g01412648
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (10). The weight of fuel tank (10) is approximately 544 kg (1200 lb). Install fuel tank (10). Install bolts (5). Install harness assembly (9). Install clips (7). Install support (8). Install bracket (6).
Illustration 8 g01412640
Install plug (2).
Illustration 9 g01412642
Connect hose (4). Connect hose assemblies (3).
Illustration 10 g01412637
Install plates (1).
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities".
Repeat Steps 1 to 4 for the opposite fuel tank. End By:
Install the bumper. Refer to Disassembly and Assembly , "Bumper - Install".