TANK AS-RADIATOR TOP 3860526 - Caterpillar

Table 1
Event Code    
Description    Default Conditions which Generate this Code    System Response    
E396(2) High Fuel Rail Pressure     The fuel rail pressure is above the trip point.     If equipped, the warning light will illuminate.
The code is logged.
The engine will default to a predetermined value.    Probable Causes
Diagnostic codes and event codes
High pressure relief valve
Fuel return line
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Do not loosen any high pressure fuel lines when the engine is running. The high pressure in the fuel lines can cause personal injury or death. Wait 60 seconds after the engine has stopped to allow pressure to purge before any service or repair is performed on the engine fuel lines.
Recommended Actions
Diagnostic Codes and Event Codes
Connect Caterpillar Electronic Technician (ET) to the service tool connector. Check for active diagnostic codes and event codes.Look for active diagnostic codes that are related to the high pressure fuel system. Use the appropriate circuit test to troubleshoot any active codes before continuing.High Pressure Relief Valve
A failed high pressure relief valve will prevent the release of excess fuel back to the pump. Refer to the Systems Operation/Testing And Adjusting manual. If a faulty high pressure relief valve is suspected, replace the valve. Refer to the Disassembly and Assembly manual.Fuel Return Line
Check the fuel return line for the following problems: restrictions, collapsed lines and pinched lines.If problems are found with the fuel return line, repair the line and/or replace the line. Refer to the Disassembly and Assembly manual.