TANK ASSEM. 4N3865 - Caterpillar

Table 20
Status(1) Description Specification Actual Comments
High Idle (M) 595 100 kPa (87 15 psi)
(1) N = Normal, M = Monitor, A = ActionRelief Valve (Torque Converter Outlet) Pressure - Test and Adjust
Table 21
Status(1) Description Specification Actual Comments
High Idle THIRD SPEED FORWARD STALL at Pressure Port (N) 415 90 kPa (60 13 psi)
(1) N = Normal, M = Monitor, A = ActionTorque Converter Lockup Clutch Pressure - Test
Table 22
Status(1) Description Specification Actual Comments
High Idle NeuTRAL 180 50 kPa (26 7 psi)
(1) N = Normal, M = Monitor, A = ActionFlywheel Lubrication Oil Pressure - Test
Table 23
Status(1) Description Specification Actual Comments
High Idle (L2) 300 105 kPa (44 15 psi)
Low Idle (L2) 205 70 kPa (30 10 psi)
(1) N = Normal, M = Monitor, A = ActionTransmission Lubrication Oil Pressure - Test
Table 24
Status(1) Description Specification Actual Comments
High Idle (L1) (Lube Control Disabled) 180 35 kPa (26 5 psi)
High Idle (L1) (Lube Control Enabled) 125 35 kPa (18 5psi)
Low Idle (L1) (Brakes Disengaged) 16 11 kPa (2.3 1.5 psi)
(1) N = Normal, M = Monitor, A = ActionS.O.S
Reference: Refer to Operation and Maintenance Manual, M0066120, "Maintenance Interval Schedule" for more detail on the following S.O.S.
Table 25
Status(1) Description Obtain Comments
Engine Oil Sample
Engine Coolant Sample (Level I)
Engine Coolant Sample (Level II)
Hydraulic Oil Sample
Transmission Oil Sample
Rear Right Final Drive Oil Sample
Rear Left Final Drive Oil Sample
(1) N = Normal, M = Monitor, A = Action