TANK 5473238 - Caterpillar

Table 1
New and Former Part Numbers
Item Qty New Part Number New Part Name Former Part Number
1 1 514-1945 Clamp-Seal 308-5612 Clamp
8T-4185 Bolt
8T-4133 Nut
453-3454 Hard Washer
Illustration 1 g06096145
Former clamp assembly
Illustration 2 g06096141
New clamp assembly
Illustration 3 g06100469
Remove existing (A) 308-5612 Clamp with bolt, nut, and washer. Peel off sealant on pipe and muffler port. Clean up the pipe surface.
Apply high temperature sealant 3M EC-1137 to exhaust pipe and muffler inlet port surface along clamp flange line. Remove excess sealant from joint.
Illustration 4 g06100904
(1) 514-1945 Clamp-Seal
Illustration 5 g06100910
Section B-B
Install the new 514-1945 Clamp-Seal. Tighten the bolts with a torque of 80 10 Nm.Note: Remove and discard the aluminum gasket from the new Clamp-Seal.Note: Tighten the bolts on the new Clamp-Seal alternately and equally.