TANK-FUEL 8F8549 - Caterpillar

Left Joystick
Illustration 2 g01216968
Horn (10) - Press the lower left button on the back of the left joystick in order to sound the horn. Release the button in order to turn the horn OFF. Magnet Control
Before operating the magnet, make sure that the generator is the active tool. Also, make sure that the generator switch is in the ON position.Note: Do not exceed the rated duty cycle of the magnet.The rated duty cycle for the magnet pickup is 75 percent. Exceeding the rated duty cycle reduces lifting capacity because of excessive heat buildup in the magnet. A maximum time of 10 minutes (duration) for magnet ON should be taken in order to avoid overheating the magnet.
Magnet Control (11) - Press the front button on the left joystick in order to turn off the magnet. When you turn off the magnet, the magnet will drop the load. Joystick Control for Rotation
Illustration 3 g01216973
Rotate Clockwise (12) - Press the right side of the top switch on the left joystick in order to rotate the grapple clockwise.Rotate Counterclockwise (13) - Press the left side of the top switch on the left joystick in order to rotate the grapple counterclockwise.Right Joystick
Illustration 4 g02794965
Manual Low Idle (14) - Press the lower left button on the back of the right joystick in order to activate low engine speed. Press the button again in order to return the engine speed to the original setting for the throttle position switch. The manual low idle allows the operator to easily reduce the rpm without touching the throttle position switch. This is useful when the operator wants to reduce the engine speed in order to talk to someone or while the operator is waiting for a truck.Push this button in order to activate heavy lift mode. Also push this button in order to deactivate heavy lift mode.
SmartBoom Temporary Disable Switch (15) - Press button (15) on the back of the right joystick in order to temporarily override the SmartBoom function. Press the button again in order to return to the selected SmartBoom function.
Magnet Control - Press the front button of the right joystick in order to turn on the magnet. When you turn on the magnet, the magnet will lift the load. Note: The joystick layout for the SmartBoom function and for the magnet control is determined by the position of the generator's switch.
Roading the machine with the cab in the elevated position can cause bodily injury.To prevent the possibility of injury, only road the machine with the cab in the lowered position.
Note: Disable the Joystick Steering control before you enable the hydraulic cab riser function.Note: Stop the machine before the cab riser is raised or lowered.
Illustration 5 g02383402
Use the cab riser switch in order to enable the cab riser function. For further information on enabling the cab riser function, refer to Operation and Maintenance Manual, "Operator Controls".
Lower Cab (16) - Move the thumbwheel on the right joystick in order to lower the cab. Note: To lower the cab, the left console