TANK & VALVE GP 8J0165 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00597280
Typical example
Place base (13) on throttle assembly (14) and install the bolts.
Install the screws and mixer housing (12) on base (13).
Illustration 2 g00597284
Typical example
Install shaft (11). Install stop assembly (9) and tighten the set screw.
Install lever (8) and tighten the bolt.
Install disc (10) and the setscrews on shaft (11).
Illustration 3 g00597239
Typical example
Install diaphragm (7) and screws (6).
Illustration 4 g00597238
Typical example
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install air valve assembly (3), spring (4), cover (5), and the screws.
Illustration 5 g00597237
Typical example
Install the gasket and adapter (1) on base (2). End By:
Install the carburetor. Refer to Disassembly and Assembly, "Carburetor - Install".