TANK ASSEM. 8J8629 - Caterpillar

Illustration 1 g01352237
Typical example
Note: The solenoid on the fuel injection pump is a serviceable item. The fuel injection pump is a nonserviceable item. (1) O-ring (2) Locking screw (3) WasherLocking the shaftLoosen locking screw (2) and move the washer (3) to the locked position. Tighten the bolt to the following torque. ... 15 N m (133 lb in)Unlocking the shaftLoosen locking screw (2) and install the washer (3) to the unlocked position. Tighten the bolt to the following torque. ... 12 N m (106 lb in)
Illustration 2 g01352239
Typical example of a support bracket
(4) Tighten the mounting bolt to the following torque. ... 44 N m (32 lb ft) (5) Tighten the mounting bolt and the nut to the following torque. ... 22 N m (195 lb in)Note: The support bracket must be installed after the coolant pump is installed. To stop the distortion of the timing case, finger tighten the bolt (4) and then tighten the nut and bolt (5). Tighten the bolt (4).Tighten the bolts that hold the fuel pump to the front housing to the following torque. ... 22 N m (195 lb in)