TANK 9S6513 - Caterpillar

Illustration 1 g06226252
Table 1
Item Qty Part Specification Description
1 1 167-2239 Buffer Seal As Lubricate the sealing lip lightly with the fluid that is being sealed.
2 1 167-2354 U-Cup Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
3 1 225-3299 Wiper Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
4 1 - Before assembly, apply green Loctite Retaining Compound 638 to the wiper seal groove.
5 2 6E-1166 Bearing Bore before assembly is 160.21 0.02 mm (6.307 0.001 inch).
Installation depth is 10.5 0.5 mm (0.41 0.02 inch).
6 1 3G-5022 Locknut Lubricate the face of nut that contacts face of the piston.
Lubricate the threads and torque to 8000 800 N m (5900 590 lb ft).
7 1 269-4738 Piston Lubricate the threads and torque to 800 80 N m (590 59 lb ft).
A 1 505-0215 Tilt Cylinder As Bore is 317.55 0.10 mm (12.502 0.004 inch).
B 1 505-0268 Rod As Diameter is 203.150 0.038 mm (7.9980 0.0015 inch).
C 1 193-4077 Head Bore over four lands is 203.48 0.03 mm (8.011 0.001 inch).
8 2 8T-0370 Bolt Tighten the head bolts with rod fully extended.
Torque to 1800 200 N m (1328 148 lb ft).
9 12 8T-0283 Bolt Tighten the head bolts with rod fully extended.
Torque to 1800 200 N m (1328 148 lb ft).