TAP G.-MACHINE 1P3020 - Caterpillar

Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove".Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01289798
Remove bolts (2). Remove sheet (1) .
Illustration 2 g01289799
Open door (3) .
Illustration 3 g01289800
Remove clips (6), (7), (8), (9), and (10). Remove bolts (4). Position condenser (5) aside.
Illustration 4 g01289801
Remove clip (13). Remove bolts (11). Position fuel cooler (12) aside.
Illustration 5 g01289803
Remove bolts (14). Position receiver assembly (15) aside.
Illustration 6 g01289804
Remove bolts (16). Remove bracket (17) .
Illustration 7 g01289806
Remove bolts (18). Remove sheet (19) .
Illustration 8 g01289807
Disconnect hose assembly (20) and (21).
Illustration 9 g01289808
Remove bolts (22) .
Illustration 10 g01289809
Remove cable straps (24). Position hose (25) aside. Remove bolts (23). Remove brace (26) .
Illustration 11 g01289811
Remove bolts (27). Remove brace (28) .
Illustration 12 g01291452
Attach a suitable lifting device to hydraulic oil cooler (29). The weight of hydraulic oil cooler (29) is approximately 635 kg (1400 lb). Remove bolts (30). Remove hydraulic oil cooler (29) .