TAP-HIGH SPEED 1P3023 - Caterpillar

Illustration 1 g01299701
Oil Pan Gp (1) 131-6678 Engine Oil Pan Gp (2) 213-0676 Switch (A) Rear face of the engine block (B) Full level for the engine oil (C) Engine cylinder block (D) Front face of the engine block (E) Add level for the engine oil.Note: The measurement between the full level (B) and the low oil level (E) is 14 mm (0.55 inch). Refer to Illustration 1.
Illustration 2 g01299658
Machine Position On A Two Degree Incline (2) 213-0676 Switch (B) Full level for the engine oil (E) Add level for the engine oil. (F) Oil level gauge (G) Full level of the engine oil on the oil level gauge (H) Approximately 400 mm (15.75 inch) (J) Warning level on the oil level switchIf the machine is on an incline, the position of the 213-0676 Switch is separate from the engine oil level gauge. Refer to Illustration 2. If the level of the switch lowers, the warning light on the monitor illuminates. The warning light will also illuminate if the oil level has decreased considerably.Investigate the status of the engine oil level if the warning light for low engine oil illuminates in the field. Add 4 L (1.0 US gal) of engine oil. The engine oil level that is indicated on the oil level gauge may be beyond the full mark. It is acceptable if the oil level is beyond the full mark and the warning light is not illuminated. Troubleshoot with the following information if the addition of the engine oil does not turn off the warning light.Periodic Inspection Of The Engine Oil Level
Illustration 3 g01300825
Location Of The Full Mark On The Oil Level Gauge (K) Full mark on the oil level gaugeCheck the engine oil level regularly. Make sure that the machine is on level ground. The engine oil level gauge becomes incorrect at a two degree tilt of the machine. The tilt of the machine may indicate a full level on the engine oil level gauge even if the level of the oil has decreased. Add engine oil if the oil level gauge indicates that the oil level is below the full mark. Make sure that the engine oil level is at the full mark on the engine oil level gauge.Oil Level Sensor
If the engine oil is at the full level, the warning light should not be illuminated. If the engine oil is at the full level and the warning light is illuminated, check the status of the 213-0676 Switch.
Illustration 4 g01301779
213-0676 Switch (L) Manufactured dateThe location of the manufactured date for the 213-0676 Switch is shown in Illustration 4. The switch should have a manufactured date of October 2003. A manufactured date that is more recent is acceptable.Note: The manufactured date that is shown in Illustration 4 is typical. The number 3 represents the manufactured date for the year 2003. The letter X represents the manufactured date for the month of October. The letter Y represents the month of November and the letter Z represents the month of