TAPE-PACKING- 4C4096 - Caterpillar

Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Raise the hood by activating the switch. Turn off the disconnect switch after the hood has been raised.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03691329
Remove panel (1).
Illustration 2 g03691345
Disconnect harness assemblies (2). Disconnect clip (3) from the frame. Reposition harness assemblies (2) out of the way.
Illustration 3 g03691347
Remove nuts (6) and washers (5) from both harness assemblies (7). Push harness assemblies (7) through bracket (4).
Illustration 4 g03691519
Remove cable strap (8) and reposition harness assembly (7) out of the way.
Illustration 5 g03691550
Disconnect harness assembly (9). Remove clamp (11). Disconnect cable assembly (10) and reposition cable assembly (10) out of the way.
Illustration 6 g03691564
Loosen clamp (12) to remove cable assembly (13) from the post.
Illustration 7 g06085544
Disconnect ground straps (14) and harness assembly (15).
Illustration 8 g06085546
Remove three bolts (16) and remove electronic starting motor (17).
Illustration 9 g06085550
Remove gasket (18).Installation Procedure
Install electric starting motor (17) in the reverse order of removal.