TAPPET 3244060 - Caterpillar

"Maintenance Indicator Mode"
The ECM records data that is related to the vehicle's maintenance. If "Distance" is selected, all maintenance indications on the service tool will be displayed in distance. Typical maintenance indications are "PM 1", "PM 2" and the "Coolant Flush/Fill".If "Hour" is selected, all maintenance indications on the service tool will be displayed in hours. Typical maintenance indications are "PM 1", "PM 2" and the "Coolant Flush/Fill". The ECM provides "PM 1" maintenance interval and last maintenance information.
Table 1
Alternative     Default    
"Auto-Distance"
"Auto-Hour"
"Man-Distance"
"Man-Hours"     "OFF"    "PM 1 Interval (Manual Maintenance Indicator Mode)"
The "PM 1 Interval" allows a maintenance interval ("PM 1") to be specified by the user. This parameter ("PM 1 Interval") must be programmed only when the Maintenance Indicator Mode is programmed to a Manual Mode (Distance or Hours).
Table 2
"Manual Distance"    
Minimum     Maximum     Default    
8047 km (5000 miles)    
56327 km (35000 miles)    
24140 km (15000 miles)    
Table 3
"Manual Hours"    
Minimum     Maximum     Default    
100     750     250    "PM1 Engine Oil Capacity (Automatic Maintenance Indicator Mode)"
The "PM 1 Interval" can be determined by the ECM. The ECM bases the "PM 1 Interval" on fuel usage. This parameter ("PM 1 Interval") must be programmed only when the Maintenance Indicator Mode is programmed to an Automatic Mode (Distance or Hours). Capacity of the sump influences the maintenance interval.
Table 4
Minimum     Maximum     Default    
19 L (20 qt)    
57 L (60 qt)    
31 L (33 qt)