TEE 0315894 - Caterpillar

Specification Data
Engine Specification
Table 1
MD6250 Diesel Engine
Model C27
Type Turbo Charged
Direct Injection
Air to Air Aftercooled
Cylinders 12
Rated Power (T4) (866 hp) at 1800 RPM
Rated Power (LRC) (839 hp) at 1800 RPM
Max. Altitude (T4) - 831 hp 12000 ft (T4)
Max. Altitude (LRC) - 799 hp 15000 ft (LRC) Machine Specification
Illustration 1 g06215826
Table 2
MD6250 Machine Specifications(1)
Max Wind Speed 20 m/s (45 mph)
High Pressure Low Pressure
Mast 11.2 m (36 ft 8 inch) 13.6 m (44 ft 7 inch)
Shoe Width 600 mm (24 inch) 750 mm (29 inch)
Ground Pressure 112 kPa (16 psi) 90 kPa (13 psi)
Mast Width 2.3 m (7 ft 5 inch) 2.3 m (7 ft 5 inch)
Mast Height 16.3 m (53 ft 6 inch) 18.7 m (61 ft 4 inch)
Mast Weight 17120 kg (37743 lb) 14650 kg (32297 lb)
Overall Weight 73250 kg (161488 lb) 70755 kg (155987 lb)
(A) Overall Height With Vertical Mast 17.9 m (58 ft 9 inch) 20 m (66 ft 10 inch)
(B) Overall Height with Horizontal Mast 5.1 m (16 ft 10 inch) 5.1 m (16 ft 10 inch)
(C) Overall Length With Out Mast 11.8 m (38 ft 9 inch) 11.8 m (38 ft 9 inch)
(D) Overall Length With Horizontal Mast 18.7 m (61 ft 4 inch) 16.3 m (53 ft 6 inch)
(E) Overall Width 5 m (16 ft 5 inch) 5 m (16 ft 5 inch)
(1) These specifications are for a machine without fuel, without drill rods, and empty water tanks.
Table 3
Drilling Capacities
Mast 11.2 m (36 ft 8 inch) 13.6 m (44 ft 7 inch)
Pull Down Force 20411 Kg (45000 lb) 29483 Kg (64999 lb)
Maximum Hole Diameter 250 mm (10 inch) 250 mm (10 inch)
Maximum Hole Depth 53.9 m (177 ft 10 inch) 37.9 m (124 ft 4 inch) Mast Winch Intended Use
This winch is designed to lift Drill Pipes and drilling tools with the mast in the vertical position. Use of this winch in any other way is prohibited and contrary to intended use.Mast Winch Specifications
Table 4
Mast Winch Specifications
Rated Load 1814 kg (4000 lb)
Max Inclined Rope Pull 1644 kg (3625 lb) Working Ranges
Illustration 2 g06237104
Table 5
(F) Maximum Operating Grade 30°