TEE AS 1488424 - Caterpillar

Edges and End Bits - Inspect/Replace
Engine Compartment - Inspect/Clean
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Tire Inflation - Check
Transmission Oil Level - Check
Windows - Clean
Every 50 Service Hours or Weekly
Articulation Bearings - Lubricate
Axle Oscillation Bearings - Lubricate
Cab Air Filter - Clean/Replace
Fuel Tank Water and Sediment - Drain
Lift Cylinder Upper Bearings - Lubricate
Steering Cylinder Bearings - Lubricate
Every 100 Service Hours or 2 Weeks
Bulldozer Stabilizer - Lubricate
Every 200 Service Hours or 1 Year
Receiver Dryer (Refrigerant) - Replace
Initial 250 Service Hours
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Check
Transmission Oil Filter - Replace
Every 250 Service Hours or Monthly
Battery - Clean
Belt - Inspect/Adjust/Replace
Brake Accumulator - Check
Braking System - Test
Crankcase Guard Compartment and Power Train Guard Compartment - Clean
Differential and Final Drive Oil Level - Check
Differential and Final Drive Oil Sample - Obtain
Drive Shaft Spline (Center) - Lubricate
Engine Air Filter Service Indicator - Inspect/Replace
Engine Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Engine Crankcase Breather - Clean
Engine Oil (High Speed) and Oil Filter - Change
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter - Replace
Transmission Oil Filter - Replace
Transmission Oil Sample - Obtain
Every 1000 Service Hours or 6 Months
Battery Hold-Down - Tighten
Drive Shaft Support Bearing - Lubricate
Rollover Protective Structure (ROPS) - Inspect
Transmission Oil - Change
Every 2000 Service Hours or 1 Year
Brake Discs - Check
Differential and Final Drive Oil - Change
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Check
Hydraulic System Oil - Change
Receiver Dryer (Refrigerant) - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 4000 Service Hours or 1 Year
Hydraulic System Oil - Change
Every 4000 Service Hours or 2 Years
Hydraulic System Oil - Change
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change