TEE AS 2501446 - Caterpillar

Illustration 1 g03402149
Table 1
Specification for 336-2306 Drive Shaft Gp
Item Qty Part Specification Description
1 1 9H-0846 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
2 24 5D-0353 Locking Bolt Torque to 56 7 N m (41 5 lb ft).
3 1 5K-0983 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
4 1 6G-0399 Disc Spring Length under test force is 8.47 mm (0.333 inch).
Test force is 34800 2088 N (7823 469 lb).
5 1 9F-7283 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
6 1 142-9961 Housing During assembly, the concentricity between the pitch diameter of the internal spline and the large internal diameter of the housing must not exceed a total indicator reading of 3.2 mm (0.13 inch).
7 1 336-2308 Drive Shaft Install the bolt (10) and the nut (9) on the shaft (8). The bolt depth should be determined with the assembly of the coupling and the retaining ring. Ensure that there should be a maximum clearance of 3.0 mm (0.12 inch) between the coupling and the retaining ring that assembles to the transfer gear
9 1 6V-8801 Nut Before assembly, apply red Loctite 271 to the threads.
10 1 5S-7003 Bolt Before assembly, apply red Loctite 271 to the threads.
11 1 9M-5048 Locknut Torque to 46 3 N m (34 2 lb ft).
12 1 5H-6005 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
13 2 117-0019 Friction Disc Thickness of one new friction disc is 7.11 0.13 mm (0.280 0.005 inch).
Before assembly, soak the friction discs in oil for minimum one hour.
14 2 6G-0387 Disc Thickness of one new disc is 2.410 0.064 mm (0.0949 0.0025 inch).
15 1 5H-4082 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
Illustration 2 g03402150
View A-A
Table 2
Item Qty Part Specification Description
16 1 5H-6005 O-Ring Seal Before assembly, apply Petro Gel Amber sparingly to bottom of the seal groove. Remove excess with lint free wipe.
17 - - Before assembly, apply red Loctite 271 to the threads of stud on the housing.
18 2 6V-8184 Full Nut Before assembly, apply blue Loctite 242 on nut side only.
Torque to 40 8 N m (30 6 lb ft).