2K5496 TEE AS-FRAME Caterpillar parts
518, 916, 920, 930, 930R, 936, IT18B
Rating:
Alternative (cross code) number:
CA2K5496
2K-5496
2K5496
CA2K5496
2K-5496
2K5496
Weight: 0.17 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$29.56
09 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar TEE A 2K5496 New
$38.16
22 May 2018
20 Hundredths Pounds
CTP: CTP
Caterpillar TEE A (2K5496)
2K5496 Weight(lbs): 0.20 Length(cm): 5.8000 Width(cm): 4.9000 Depth(cm): 6.1000
2K5496 Weight(lbs): 0.20 Length(cm): 5.8000 Width(cm): 4.9000 Depth(cm): 6.1000
Number on catalog scheme:
19
For full view, you need register
Compatible equipment models: 2K5496:
Information:
Remove & Install Marine Gear Oil Cooler Core (Marine Engine)
1. Drain the coolant from the engine into a suitable container for storage or disposal.2. Disconnect the oil inlet and outlet lines. Cap or plug all openings immediately. 3. Remove eight bolts (1) and cover (2) from the housing, and remove the two O-ring seals from the cover. 4. Remove core assembly (3) and gasket (4) from the housing. The following steps are for installation of the marine gear oil cooler core.5. Put gasket (4) and core assembly (3) in position in the housing.6. Install the two O-ring seals in cover (2). Put cover (2) in position on the housing, and install bolts (1).7. Connect the oil inlet and outlet lines.8. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.Remove & Install Marine Gear Oil Cooler (Marine Engine)
1. Drain the coolant from the engine into a suitable container for storage or disposal.2. Disconnect the oil inlet and outlet lines. Cap or plug all openings immediately. 3. Disconnect tube (1) from the turbocharger and marine gear oil cooler, and remove the tube. Cap or plug all openings immediately. 4. Remove the bolts that hold clip (4) to the oil cooler, and remove the clip.5. Remove four bolts (2), and remove marine gear oil cooler (3).6. Remove the gasket and O-ring seal from oil cooler (3). The following steps are for installation of the marine gear oil cooler.7. Put the gasket and O-ring seal in place on the marine gear oil cooler. Put clean engine oil on the O-ring seal.8. Put marine gear oil cooler (3) in position on the engine, and install bolts (2).9. Put clip (4) in position on the oil cooler, and install the two bolts that hold it.10. Install tube (1) between the turbocharger and the marine gear oil cooler.11. Connect the oil inlet and outlet lines.12. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.
1. Drain the coolant from the engine into a suitable container for storage or disposal.2. Disconnect the oil inlet and outlet lines. Cap or plug all openings immediately. 3. Remove eight bolts (1) and cover (2) from the housing, and remove the two O-ring seals from the cover. 4. Remove core assembly (3) and gasket (4) from the housing. The following steps are for installation of the marine gear oil cooler core.5. Put gasket (4) and core assembly (3) in position in the housing.6. Install the two O-ring seals in cover (2). Put cover (2) in position on the housing, and install bolts (1).7. Connect the oil inlet and outlet lines.8. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.Remove & Install Marine Gear Oil Cooler (Marine Engine)
1. Drain the coolant from the engine into a suitable container for storage or disposal.2. Disconnect the oil inlet and outlet lines. Cap or plug all openings immediately. 3. Disconnect tube (1) from the turbocharger and marine gear oil cooler, and remove the tube. Cap or plug all openings immediately. 4. Remove the bolts that hold clip (4) to the oil cooler, and remove the clip.5. Remove four bolts (2), and remove marine gear oil cooler (3).6. Remove the gasket and O-ring seal from oil cooler (3). The following steps are for installation of the marine gear oil cooler.7. Put the gasket and O-ring seal in place on the marine gear oil cooler. Put clean engine oil on the O-ring seal.8. Put marine gear oil cooler (3) in position on the engine, and install bolts (2).9. Put clip (4) in position on the oil cooler, and install the two bolts that hold it.10. Install tube (1) between the turbocharger and the marine gear oil cooler.11. Connect the oil inlet and outlet lines.12. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.
Cat SIS web machinery list:
Parts tee Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES,...
1140, 1145, 1150, 1160, 3160, 3208, 3304, 3306, 3408, 3412, 528, 55, 784C, 785B, 785C, 789B, 789C, 793B, 793C, 814B, 815B, 816B, 824C, 825C, 826C, 916, 920, 926, 926A, 930, 936, 936F, 950B, 950B/950E,...
120, 120G, 12G, 130G, 140, 140G, 14G, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 307B, 311, 311B, 312, 312B, 312B L, 313B, 315, 315B, 31...
3408, 3408B, 3408C, 3412, 3412C, 57, 58, 916, 920, 930, 930R, 936, 936F, 950, 950F, 966D, 966F, 980F, G936
120B, 3612, 3618, 518, 518C, 528, 528B, 530B, 571G, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 814, 815, 816, 824C, 834B, 920, 930, 930R, 936, 950, 966C, 966M, 966M...
518, 528, 630B, 651E, 657E, 666, 769, 910, 920, 930, 930R, 950, 955L, 977K, 983, CS-323, D10, D3, D343, D348, D398, D398B, D399, D9G, SCT673, SPF343, SPS342, SPS343, SPT342, SPT343
120B, 140B, 518C, 528B, 530B, 57, 572R, 572R II, 578, 58, 583R, 583T, 587R, 587T, 7271, 916, 966F, 966F II, 970F, 980, 980B, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPA...
528, 528B, 530B, 920, 930, 930R, 950, 950B, 950B/950E, 950F, D379B, D398, D398B, D399
120, 140, 3126B, 3126E, 517, 527, 528, 561M, 561N, 613, 920, 930, 930R, 950, 950B, 966D, 966F, 966F II, 970F, 992, AD40, AE40, D3, D4H, D4H XL, D4HTSK II, D4HTSK III, D5, D5B, D5H, D5H XL, D5HTSK II, ...
518, 528, 528B, 530B, 910, 920, 930, 930R, IT12
920, 930, 930R, 950
916, 920, 926, 930, 930R, 950B, 950B/950E, IT18B, IT28, IT28B
916, 920, 926, 930, 930R, 950B, 950B/950E, IT18B, IT28, IT28B
5C5871
TEE
920
920
5G2740
TEE
910, 966F II, IT12
910, 966F II, IT12
5P0220
TEE
814B, 910
814B, 910
6I9258
TEE
320 L, 627B
320 L, 627B
5P4464
TEE
613
613
814B, 815B, 816B, 824C, 825C, 826C, 916, 950F, 966D, 966F, 980C, 980F, 980F II, IT18B
926, 936, 936F, G936, IT28, IT28B
0618261
TEE-FLARED
621B, 623B, 627B, 834B, 988B, 992C, RR-250, SS-250
621B, 623B, 627B, 834B, 988B, 992C, RR-250, SS-250
6V5513
TEE-INVERTER FLARED
926, 936F, IT28
926, 936F, IT28
5P4416
TEE-AIR BRAKE
613B, CB-434, CB-534, CB-534B, CB-535B, CB-634
613B, CB-434, CB-534, CB-534B, CB-535B, CB-634
5C8984
TEE
910, 920
910, 920