TEE 2P8098 - Caterpillar

Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Replace the filter elements if the transmission oil filter indicator comes on during operation.The secondary filter is located on the right side of the machine under the access panel.
Illustration 1 g06273658
Open access covering the filter.
Remove the spin-on type filter element and properly discard the filter element.
Clean the filter element housing with a clean cloth.
Inspect the seal. If the seal is damaged, replace the seal.
Install the new spin on filter element.
Close the access cover.
Start the engine.
Illustration 2 g06273603
(1) Dipstick
(2) Oil filler
Maintain the oil level in the "OPR ZONE" on the dipstick (1). If necessary, add oil through the filler tube (2).
Stop the engine.