TEE 5P6869 - Caterpillar

Illustration 35 g06057124
(17) 461-5662 Hose As
(18) 461-5663 Hose As
(M) Hard Washer
(N) Bolt
(P) Clip
(R) Clip
(S) Grommet
(T) Old hole
(V) New hole
(W) Nut
Assemble the modified left-hand angle cylinder hose guard assembly (D) from Step 1 using the bolts and washers (D1), (D2) from Step 2. Position the clamp on the cylinder to align with the new hole (V) in the guard made in the previous step. Tighten the nuts on the clamp bolts.
Secure the hose (18) using the clip (P), clip (R), grommet (S), bolt (N), and washer (M) from Step 2. Secure the hose (17) using clip (P), clip (R), grommet (S), bolt (N), and two washers (M), and nut (W) from Step 2. See Illustration 35.
Illustration 36 g06057071
See Illustration 37 for region (HH)
( 10) 461-5658 Clamp
(12) 8T-4184 Bolt
(13) 8T-4223 Hard Washer
(14) 329-3356 Nut
(20) 461-5660 Clamp As
Assemble clamps (10) and (20) using two bolts (12), four washers (13), and two nuts (14). Assemble the right-hand angle cylinder hose guard assembly (H) using bolts (H1) and washers (H2) from Step 1. See Illustration 36.
Illustration 37 g06057104
Region (HH)
( 17) 461-5662 Hose As
(18) 461-5663 Hose As
(19) 7X-0632 Hard Washer
Assemble two piece hose clamp (HH3), (HH4), and grommet (HH5) for hose (17) using bolt (HH1) and washer (HH2). Assemble two piece hose clamp (HH3), (HH4), and grommet (HH5) for hose (18) using bolt (HH1), washer (HH2), washer (19), and nut (W). Refer to Illustration 37, View of region (HH).
Illustration 38 g06068655
Adjust the positions of hose (17) and (18) in the center clips and secure the clips left loose from Step 11, left cylinder.Line Relief Replacement (Group 1 and Group 2 Machines) Needed Parts
Table 7
Line Relief Replacement Needed Parts
Item Qty Part Number Description
1 2 464-4067 Check and Relief Valve Gp Line Relief Replacement Procedure (Group 1 And Group 2 Machines)
Illustration 39 g06056038
Remove the operator seat, right-hand armrest, and platform access panels to gain access to the angle section of the hydraulic valve stack. See Illustration 39.
Illustration 40 g06056046
View from front access panel opening
(A) Right angle solenoid
Illustration 41 g06056051
View from side access panel opening
(B) 269-0858 Check and Relief Valve Gp
(C) Angle valve section
Illustration 42 g06056056
View from side access panel opening
(B) 269-0858 Check and Relief Valve Gp
(D) Left angle solenoid
Temporarily remove the right (A) and left (D) angle solenoid valve housing to gain access to the line relief valves. The wiring harness solenoid tags can be used to help identify the solenoids. Refer to Illustrations 40, 41, and 42. Replace the existing 269-0858 Check and Relief Valve Groups with 464-4067 Check and Relief Valve Groups. Tighten the valve groups to 145 15 N m (106.95 11.06 lb ft). Reassemble the solenoid valve housings, access panels, operator seat, and armrest.