TEE-O-RING 6M6853 - Caterpillar

User Operations
This section contains information about UPS settings you may adjust with UPS View. The paragraphs in this section are arranged to reflect the order in which the commands and selections appear in UPS View.Note: The settings shown in the examples are only for instruction and are not to be used as settings required by your system. Refer to the appropriate manual for settings required by your UPS.Enter Password
Select "Log On" (or "Enter Password") from the default menu.
Illustration 1 g01149289
After entering your username and password Select "OK".Note: If you enter an incorrect password, the system gives you the opportunity to re-enter the user name and password.Acknowledge a Page
Dial into the system (use UPS View).Note: When connected, the system displays a buzzer dialog screen.
Click "OK" to silence the buzzer.Dump Telemetry Data to File
This operation causes UPS View to save to disk all telemetry currently in the memory of the computer attached to the system. This menu allows the user to generate a set of "Dump Data" logs.
Select "File" from the default menu.
Select "Dump Telemetry Data" from the drop-down menu.
Illustration 2 g01149302
Log All Telemetry Data
This function forces all telemetry data received by UPS View to be saved to the General log files. Effectively, the new Telemetry Data will override the default data log rate set by the UPS.
Select "File" from the default menu.
Select "Log All Telemetry Data" from the drop-down menu.
Illustration 3 g01153684
Note: This option should be used sparingly. UPS View receives large quantities of data. The system automatically sends the required data to UPS View. This data will then be logged to a disk. You do not need to store all of the data all of the time.Note: The files are not deleted automatically, the files must be deleted manually as needed.Increment Log Files
This menu option will flush data to disk, close old log files, and open a new set of log files (effectively incrementing the file number).UPS Settings
The UPS settings drop-down menu has various selections:
Remote Notification Settings
Modem Configuration
Network Configuration
SNMP Configuration
Set System Name
Set System Time
Set User Defined Messages
Update Firmware
Update System Software OptionsTo access UPS settings, perform the following:
Select "UPS Settings" from the menu bar to display the selections that are listed in the "UPS Settings" menu. Refer to illustration 4.
Illustration 4 g01149356
Set System Name
Select "UPS Settings" from the main menu bar.
Illustration 5 g01149362
Select "Set System Name" from the drop-down menu.
Press "Receive" to identify your present settings.
Illustration 6 g01149368
Enter the new name.
Press "Send" to save the changes.Set System Time
This option allows the user to set the date and time to match the computer running UPS View. Reset the time and date to the local time zone.
Illustration 7 g01149373
Select "UPS Settings" from the main menu bar.
Select "Set System Time" from the drop-down menu.
Press "Receive" to identify the present settings.
Enter the new "Time".
Illustration 8 g01149382
Press "send" to save the changes.User Defined Messages
There are contacts on the UPS that can be used to detect an external event. When a contact assigned to this function closes, one of the user messages will be printed.
Select "UPS Settings" from the main menu bar.
Select "Set