TEE-FACE SEAL 6V8777 - Caterpillar

Marine Engine:
C30 MARINE (S/N: CLX1-UP)
C32 MARINE (S/N: RXB1-UP; RNC1-UP; RND1-UP; RNR1-UP; SLT1-UP; T3T1-UP; RNY1-UP; RNZ1-UP)
An improved procedure for preventing oil leaks around the gasket of the spacer plate is now used on the engines that are listed above. For improved sealing performance, apply 4C-9505 Gasket Sealant to the total surface on both sides of 225-3101 Plate Gasket. Apply a thin layer of less than 1 mm (0.04 inch) of 4C-9505 Gasket Sealant on each side of the 225-3101 Plate Gasket. Do not allow the 4C-9505 Gasket Sealant to be placed on the contact surfaces of the 3E-6772 Seal .Directions for Use of the Gasket Sealant
Remove all previous material from mating surfaces.
For best results, clean all surfaces and dry all surfaces with a solvent that is free of residue.
Remove the cap and apply with the applicator.
When the sealant is used as a dressing for the gasket, spread the product with a spatula to a uniform film on one side of gasket. Position the gasket on the assembly. Coat the second side of gasket and assemble. Formulas that dry more slowly increase the time for the procedure.
Once the repairs are completed and the sealant has had adequate time to cure, the engine can be run.Cleanup
The product can be removed from metal surfaces with isopropyl alcohol. If the sealant has been dried for a long time or at high temperatures, cover the sealant with alcohol and allow the sealant to soften overnight.
Clean hands.