TEMPERATURE SWITCH (NORMALLY CLOSED) 2U0698 - Caterpillar

Table 1
Settings Of The Engine Speed Dial (RPM)    
Dial Setting     311B     312B     315B     317B     318B     320B     322B     325B     330B    
1     850     850     900     900     930     900     800     800     720    
2     1100     1100     1100     1100     1100     1020     970     950     850    
3     1250     1250     1250     1250     1300     1160     1130     1100     1000    
4     1380     1400     1400     1400     1460     1300     1300     1250     1150    
5     1500     1550     1550     1550     1620     1470     1460     1425     1300    
6     1600     1700     1700     1700     1780     1590     1610     1600     1450    
7     1700     1800     1850     1850     1940     1700     1750     1750     1600    
8     1800     1900     2000     2000     2100     1800     1890     1900     1750    
9     1900     2000     2150     2150     2260     1900     2030     2050     1850    
10     1980     2080     2200     2300     2420     1970     2120     2180     1960    
Enter service code "1b". The following information will be displayed: the name of the model, type of engine and type of control levers."1b 25 CH" is an example.25 - This number indicates 325B.C - This letter indicates a Caterpillar engine.H - This letter indicates the type of hydraulic control levers.Note: When "H" is being displayed in the second position from the right, the display will indicate a "MHI mode" type of engine.Enter service code "1A". The fine control mode switch (25) is pressed in order to move the number that is flashing to the second position from the left. The boom priority mode switch (23) is pushed until a flashing "A" appears. The position of the speed dial is shown by the third number from the left. The three numbers from the left will show the engine rpm that is multiplied by 10. Move the speed dial to the different positions in order to read the target rpm for that speed position.This function is used to verify that the setting of the engine speed at each position of the engine speed dial corresponds to the factory settings of the engine speed. For the proper engine RPM, refer to the chart.