TERMINAL-BLADE 1041995 - Caterpillar

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Shock Hazard (8)Safety message (8) is located on the cover of the fuse panel.
g00941949
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Seat Belt (9)Safety message (9) is located on the right console to the right of the counterweight control.
g01066835
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
Product Link (10) If equipped, safety message (10) is located on the console to the right of the operator seat. Refer to Operation and Maintenance Manual, SEBU7351, " Product Link" for information about this service tool.
g01089271
This machine is equipped with a Caterpillar Product Link communication device which should be deactivated in or near a blast site in compliance with applicable legal requirements. Failure to do so could cause interference with blasting operations resulting in serious injury or death.
Improper Connections for Jump Start Cables (11)Safety message (11) is located on the bottom side of the battery box cover.
g01067366
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
High Pressure Cylinder (12)Safety message (12) is located on the access cover on both track roller frames.
g01220115
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
High Pressure Recoil Spring (13)Safety message (13) is located inside both track roller frames. The safety message is located on the front frame of the rear track roller frame. Safety message (13) is also located inside the cover for the twister resister on both track roller frames.
g01219973
Recoil spring force, if not relieved, can result in personal injury or death. Relieve spring force before removing the threaded retainer, performing repairs on the recoil spring housing, or removing the recoil spring. Consult a Caterpillar dealer for disassembly instructions.