TERMINAL 1224401 - Caterpillar

High Pressure Recoil Spring (9)Safety message (9) is located inside both track roller frames. The safety message is located on the front frame of the rear track roller frame. Safety message (9) is also located inside the cover for the twister resister on both track roller frames.
Illustration 10 g01379131
Recoil spring force, if not relieved, can result in personal injury or death. Relieve spring force before removing the threaded retainer, performing repairs on the recoil spring housing, or removing the recoil spring. Consult a Caterpillar dealer for disassembly instructions.
Hydraulic System Accumulator (10)Safety message (10) is located beneath the fender on the right hand platform.
Illustration 11 g01371642
Hydraulic accumulator contains gas and oil under high pressure. Improper removal or repair procedures could cause severe injury. To remove or repair, instructions in the service manual must be followed. Special equipment is required for testing and charging.
High Pressure Cylinder (11)Safety message (11) is located on the access cover on both track roller frames.
Illustration 12 g01372252
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
Do Not Operate Equipment (12)Safety message (12) is located on the right side of the machine on the rear vertical wall of the winch frame.
Illustration 13 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Product Link (13)If equipped, safety message (13) is located on the console to the right of the operator seat. Refer to Operation and Maintenance Manual, SEBU7351, " Product Link" for information about this service tool.
Illustration 14 g01370917
This machine is equipped with a Caterpillar Product Link communication device. When electric/electronic detonators are used, this communication device should be deactivated within 12 m (40 ft) of a blast site, or within the distance mandated under applicable legal requirements. Failure to do so could cause interference with blasting operations and result in serious injury or death.
Shock Hazard (14)Safety message (14) is located on the cover of the fuse panel.
Illustration 15 g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.