TERMINAL-RECEPTACLE 3E9179 - Caterpillar

Illustration 2 g01211121Engine Serial Number ____________________Drawworks Serial Number
The DSN (2) is located on the vertical wall of the winch frame near the bottom drum. Do not operate or service the winch unless you first read the “Operation and Maintenance Manual” with understanding the instructions for the safe operation of the winch.
Illustration 3 g02735257
Illustration 4 g01323812Drawworks Serial Number____________________Model ____________________Service Information Number
The SIN (3) is located on the front of the left-hand console.
Illustration 5 g01211054Service Information Number Plate (SIN) ____________________Machine PIN
The plate for Machine PIN (4) is located on the rear of the machine on the left-hand rear of the case.
Illustration 6 g01188096
Illustration 7 g02733003Model Number (A)Machine PIN (B)____________________Year of Manufacture (If required) (C)____________________CE Plate (If required) (D)____________________Country of Origin (If required) (E)____________________Transmission Serial Number
The transmission serial number (4) is located at the rear of the machine on the transmission cover.
Illustration 8 g01188054Transmission Serial Number ____________________European Union
This plate is positioned on the bottom left side of the Product Identification Number (PIN).For machines compliant to "2006/42/EC", the following information is stamped onto the "CE" plate.
Illustration 9 g01883459For a quick reference, record this information in the spaces provided below.
Engine Power primary engine (kW)____________________
Engine Power for additional engine if equipped (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year of construction____________________
Machine Type____________________For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate.
Illustration 10 g01062968For quick reference, record this information in the spaces provided below.
Engine Power primary engine (kW)____________________
Typical machine operation weight for European market (kg)____________________
Year____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Certifications
ROPS
Illustration 11 g02263516
Illustration 12 g02263517This film is located on the right side of the ROPS above the operator station or the cab.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.