TERMINAL AS 3T4412 - Caterpillar

Illustration 1 g01357669
(1) Piston pump (implement) (2) Pressure and flow compensator valve (3) Piston pump (steering and pilot) 168-7873 Piston Pump Gp (REAR)
Illustration 2 g01357670
(4) Torque for the O-ring plug ... 105 10 N m (75 7 lb ft) (5) Torque for the control plug ... 90 15 N m (65 11 lb ft) (6) Grind the 127-9483 Shim to the required thickness. The faces of the shim must be ground parallel within the following dimension. ... 0.05 mm (0.002 inch) (7) Torque for four bolts ... 100 20 N m (75 15 lb ft)High pressure cutoff ... 20700 350 kPa (3000 50 psi)Maximum standby pressure ... 5000 kPa (725 psi)Margin pressure at 2400 rpm with a discharge pressure of 15000 kPa (2200 psi) and a flow rate of 75 L/min (20 US gpm) ... 3600 100 kPa (520 15 psi)Maximum flow rate at 2400 rpm with a discharge pressure of 6900 kPa (1000 psi) ... 105 L/min (28 US gpm) 168-7323 Pump Control Valve Gp (PRESSURE AND FLOW COMPENSATOR)
Illustration 3 g01357686
(8) Before installation, apply 4C-4030 Thread Lock Compound to the threads of the plugs. (9) 6E-3274 Spring Length under test force ... 14.4 mm (0.57 inch) Test force ... 81.7 14.5 N (18 3.3 lb) Free length after test ... 15.9 mm (0.63 inch) Outside diameter ... 7.7 mm (0.30 inch) (10) 6E-3275 Spring Length under test force ... 15.1 mm (0.60 inch) Test force ... 40.2 2.8 N (9.0 0.6 lb) Free length after test ... 20.5 mm (0.81 inch) Outside diameter ... 10.7 mm (0.42 inch) (11) Torque for the adjustment nut ... 21 N m (15 lb ft) (12) Torque for the cap nut ... 21 N m (15 lb ft) (13) 6E-3276 Spring Length under test force ... 32.6 mm (1.28 inch) Test force ... 462 71 N (105 16 lb) Free length after test ...