TERMINAL AS 3T5452 - Caterpillar

Illustration 1 g03720534
Table 1
Specification for 433-4380 Lift Cylinder Gp
Item Qty Part Specification Description
1 1 9J-7100 Bushing Bore before assembly is 89.25 0.02 mm (3.514 0.001 inch).
Installation depth is 10.0 0.3 mm (0.39 0.01 inch).
2 1 147-5835 Special Locknut Before assembly, lubricate the face and the threads.
Torque to 6300 630 N m (4647 465 lb ft).
A 1 433-4376 Lift Cylinder As Bore is 160.00 0.08 mm (6.299 0.003 inch).
B 1 434-8999 Rod As Diameter is 84.930 0.038 mm (3.3437 0.0015 inch).
3 1 433-4379 Head Before assembly, lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
Bore (C) over four lands is 85.33 0.03 mm (3.359 0.001 inch).
4 1 265-9683 Wear Ring Bore before assembly is 85.0 mm (3.35 inch).
5 1 170-9844 Buffer Seal Lubricate the sealing lip lightly with fluid that is being sealed.
6 1 170-9860 U-Cup Seal Lubricate the sealing lip lightly with fluid that is being sealed.
7 1 165-9286 Lip Type Seal Lubricate the sealing lip lightly with fluid that is being sealed.
8 - - Before assembly, apply green Loctite 648 to the wiper seal groove.