AVSPARE.COM
parts catalog

TERMINAL-CABLE 4415807 - Caterpillar



4415807 TERMINAL-CABLE Caterpillar parts TERMINAL
Rating:
26
Alternative (cross code) number:
CA4415807
441-5807
4415807
Caterpillar 4415807 TERMINAL-CABLE
Weight: 0.01 pounds 0 kg.

Buy TERMINAL-CABLE 4415807 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Fuel System Components
Fuel Injection Pump
General Operation
The fuel injection pump is a pressurized system that is enclosed. The pump sends the correct amount of fuel under high pressure at the correct time through the fuel injection nozzles to the individual cylinders. The fuel injection pump regulates the amount of fuel that is delivered to the fuel injection nozzles. This action controls the engine rpm by the governor setting or the position of the throttle control.The fuel lines to the fuel injection nozzles are equal lengths. This arrangement ensures even pressure and correct injection timing at each fuel injection nozzle.During operation, extra fuel is used as coolant and lubricant for moving parts of the pump. The extra fuel is circulated through the pump housing. The extra fuel is then returned to the fuel tank.The Delphi DP210 fuel injection pump must be serviced by an authorized Delphi technician. For repair information, contact your Cat dealer. High idle and low idle of the fuel injection pump are factory set. Idle adjustments cannot be made to the fuel pump. The fuel injection pump has a boost control and an engine stop solenoid. The Delphi DP210 fuel injection pump has a feature that vents air from the pump.The fuel injection pump has a cold starting aid. The cold starting aid advances the timing of the pump when the engine is cold. The cold starting aid is electrically operated.Cold Start Advance Unit.
The cold start advance unit holds the timing of the fuel injection pump in an advance position when the engine is cold.The coolant switch for the cold start advance unit is normally on the rear of the timing case on the left side of the engine. However, on certain applications, the switch may be located on the end of the cylinder head.When the engine is cold, the sender unit is energized in order to advance the fuel injection pump timing for the cold start operation. When the correct temperature is achieved, the sender unit is de-energized and the fuel injection pump timing is returned to the normal operating position.If the switch fails in the closed position, the engine will run with advanced fuel injection timing. The engine will have higher cylinder pressure and engine damage may result.If the switch fails in the open position, the engine will run with the fuel injection timing in the normal operating position. The engine will be more difficult to start. When the engine is cold, the engine might emit white smoke.


Parts terminal Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.