TERMINAL AS 5M9205 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hoses on all hose assemblies and on wires and all tube assemblies for installation purposes. Plug all hose assemblies and plastic tube assemblies. This will help to keep contaminants from entering the system.
Shut off the air supply at the air reservoir. Drain the pressurized air from the air starting system. The sudden release of pressurized air can cause personal injury.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Turn the air supply at the air reservoir to the OFF position. Ensure that the air pressure is drained from the starting air system.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01530473
Disconnect hose assembly (5) from air starting motors (1). Move the hose assembly away from the air starting motor.
Disconnect plastic tube assembly (3) and plastic tube assembly (4) from air starting motor (1).
Support the weight of air starting motor (1). Remove bolts (2) and remove air starting motor (1) from the flywheel housing.
If necessary, remove the solenoid for the air starting motor from the generator base. Follow Step 7.a through Step 7.c in order to remove the solenoid.
Disconnect harness assembly (10).
Disconnect plastic tube assembly (7) and plastic tube assembly (8) from solenoid (6).
Remove nuts and bolts (9) and remove the solenoid from generator base.