TEST KIT- 1496111 - Caterpillar

Illustration 1 g00559405
The machine control pattern is initially set at the factory to the SAE pattern, as shown. The patterns can be changed to a multitude of combinations. If you want to change the settings consult your Caterpillar dealer. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.
Illustration 2 g00570709
Press numeric key "8" on the keypad in order to display the current machine control pattern.The machine control pattern is also displayed when the monitor turns on.Rotating Grapple Control
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Boom Raise (7) - Move the joystick to this position in order to raise the boom. HOLD (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.Positions (6) and (8) of the right joystick are plugged. No hydraulic functions are performed when the joystick is in these positions.Left Joystick
Illustration 3 g00330763
Grapple Rotate Clockwise (10) - Press the left side of the rocker switch in order to rotate the grapple clockwise.
Horn (11) - Press the lower switch on the left joystick in order to activate the horn.
Grapple Rotate Counterclockwise (12) - Press the right side of the rocker switch in order to rotate the grapple counterclockwise. Right Joystick
Illustration 4 g00767150
Grapple Close (13) - Press the left side of the rocker switch in order to close the grapple.
AEC Switch (14) - Press the lower switch on the top of the right joystick in order to activate low engine speed. Press the switch again in order to activate high engine speed.
Grapple Open (15) - Press the right side of the rocker switch in order to open the grapple.