THERMOCOUPLE- 2385636 - Caterpillar

Illustration 4 g01146384
Install Tooling (B) underneath bottom rear axle guard (4) .
Illustration 5 g01146389
Remove bolts (5) and plate (6). Repeat for the other side.
Illustration 6 g01146392
Use Tooling (B) in order to lower bottom rear axle guard (4) to the ground. The weight of bottom rear axle guard (4) is approximately 125 kg (275 lb).
Illustration 7 g01146394
Use the suitable lifting device in order to lower top rear axle guard (1). The weight of top rear axle guard (1) is approximately 82 kg (180 lb).
Illustration 8 g01146395
Remove bolts (7) and (9). Remove guard (8) .
Repeat Step 1 through Step 8 for the opposite side.Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
B     1U-7505     Hydraulic Jack     1    
Illustration 9 g01146395
Position guard (8). Install bolts (7) and (9) .
Illustration 10 g01146394
Use the suitable lifting device in order to position top rear axle guard (1). The weight of top rear axle guard (1) is approximately 82 kg (180 lb).
Illustration 11 g01146392
Use Tooling (B) in order to position bottom rear axle guard (4). The weight of bottom rear axle guard (4) is approximately 125 kg (275 lb).
Illustration 12 g01146389
Position plate (6). Install bolts (5). Repeat for the other side.
Illustration 13 g01146384
Install Tooling (B) underneath bottom rear axle guard (4) .
Illustration 14 g01146382
Install bolts (3) to bottom rear axle guard (4) .
Illustration 15 g01146380
Install bolts (2). Repeat for the other side.
Illustration 16 g01146378
Remove Tooling (A) and the suitable lifting device from top rear axle guard (1) .
Repeat Step 1 through Step 8 for the opposite side.End By: Install the rear compactor wheels. Refer to Disassembly and Assembly, "Compactor Wheel (Rear) - Install".