THERMOMETER-IR 2510030 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Remove the crankcase guard.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Use caps and plugs on all lines, hoses, and tubes to prevent fluid loss or contamination of the systems.
Drain the cooling system.
Illustration 1 g06078200
Remove hose assembly (1).
Illustration 2 g06078210
Remove hose assembly (2).
Illustration 3 g06078215
Remove hose (3).
Illustration 4 g06078217
Remove hose (4).
Illustration 5 g06078221
Remove clips (5) and reposition hose assemblies (6).
Illustration 6 g06078223
Remove clips (8) and reposition hose assemblies (7).
Illustration 7 g06078264
Remove bolts (10). Using two people, remove transmission cooler (9).Installation Procedure
Install transmission oil cooler (9) in the reverse order of removal.