THERMOMETER- 9U5323 - Caterpillar

Exhaust Temperature Sensitivity Calculation
High exhaust temperature in an engine is a major contributor to reduced engine component life. The life of turbochargers and valves are greatly affected by continued exposure to exhaust temperatures in excess of the maximum inlet to turbocharger temperatures, as published in the Technical Marketing Information (TMI). This exhaust temperature sensitivity calculation is applicable to all 3500 Series Engines.There are several variables in every engine installation that can have a significant impact on engine exhaust temperature. The "Exhaust Temperature Sensitivity Calculation" ensures that the system design takes all the different variables into consideration prior to engine installation.The "Exhaust Temperature Sensitivity Calculation Worksheets" on the following pages should be used as a guide by customers and dealers when sizing a system for 3500 and 3500B Engines. This worksheet will help determine the critical factors that must be considered at the time an engine installation is being planned. When the worksheet calculation is completed using the expected maximum altitude, ambient temperature, restriction (air inlet and exhaust), and aftercooler temperature for the engine, the result will be an "expected inlet to turbocharger temperature".If the calculated temperature is below the maximum "inlet-to-turbocharger" temperature, as shown in TMI, and the charts in this publication, normal engine life can be expected. If the temperature is above the maximum "inlet-to-turbocharger" temperature, changes in the installation must be made to reduce the maximum expected exhaust temperature. If changes are not made, engine component life can be affected.Do not perform any procedure, outlined in this publication, or order any parts until you have read and understood the information contained within this Special Instruction.TMI Exhaust Maximum (measured at inlet to turbocharger)
Exhaust Temperature Sensitivity Worksheet Metric Units
Air Filter Inlet Temperature1. Record, in column B, temperature at engine's air filters when operating at rated.2. Subtract column C from column B and record the answer in column D.3. Multiply 1.8 times