0337645 THERMOSTAT Caterpillar parts
206, CB-424
Rating:
Alternative (cross code) number:
CA0337645
033-7645
0337645
CA0337645
033-7645
0337645
Weight: 0.18 pounds 0 kg.
EXCAVATOR, VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hacus - THERMOSTAT
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations || SAFETY FIRST - FPE products are ready for use with all certifications || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market || All products tested for durability, reliability, and performance
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations || SAFETY FIRST - FPE products are ready for use with all certifications || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market || All products tested for durability, reliability, and performance
Hacus - Thermostat
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
$12.40
24 Jul 2020
-: -
New Thermostat Replacement For 63076, M01-11-02, 033-7645, 2100071, 2485635, 2485648
New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed) || Thermostat Replaces 63076, M01-11-02, 033 -7645, 2100071, 2485635, 2485648 || 1 Year Warranty
New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed) || Thermostat Replaces 63076, M01-11-02, 033 -7645, 2100071, 2485635, 2485648 || 1 Year Warranty
Number on catalog scheme:
5
For full view, you need register
Information:
Conditions Which Generate This Code:
Illustration 1 g01245812
Schematic of the torque converter oil temperature sensorThis diagnostic trouble code is associated with the torque converter oil temperature sensor. The FMI 16 means that the ECU has determined that the oil temperature is above a normal operational range. The temperature could cause severe damage. The ECU reads the resistance from the sensor. A high oil temperature will send a low voltage to the ECU. The high temperature sends a voltage that is lower than the expected result for the ECU.The cause of this diagnostic trouble code is listed:
The oil temperature has reached 121° 8°C (250° 14°F).The possible causes of this diagnostic trouble code are listed:
Excessive oil temperatureSystem Response:The vehicle is safe when the temperature of the oil is below 121 °C (250 °F). Oil at this temperature is in the green area on the gauge. Operators should modify the operation of the vehicle in order to reduce the temperature of the oil as soon as possible when the temperature is between 121 °C (250 °F) and 149 °C (300 °F). Oil at this temperature is in the yellow area on the gauge. Operating a vehicle can result in damage to the transmission when the temperature of the oil is above 149 °C (300 °F). Oil at this temperature is in the red area on the gauge.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result:The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to test step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness or replace the machine harness. STOPTest Step 2. VERIFY THE TEMPERATURE OF THE OIL.Check the temperature of the oil.Results:
OK - The temperature of the oil is correct. Proceed to Test Step 3.
NOT OK - The temperature of the oil is not correct.Repair: Stop the engine until the oil temperature returns to an acceptable range.STOPTest Step 3. CHECK IF THE DIAGNOSTIC TROUBLE CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit.
Reconnect all harness connectors. Make sure that the harness connectors are fully seated and that the clips for each connector are completely fastened.
Turn the disconnect switch and the key start switch to the ON position.
Operate the vehicle.
Check the status of the SPN 3823 FMI 16.Expected Result:The SPN 3823 FMI 16 is active. Results:
YES - The SPN 3823 FMI 16 is active. The diagnostic trouble
Illustration 1 g01245812
Schematic of the torque converter oil temperature sensorThis diagnostic trouble code is associated with the torque converter oil temperature sensor. The FMI 16 means that the ECU has determined that the oil temperature is above a normal operational range. The temperature could cause severe damage. The ECU reads the resistance from the sensor. A high oil temperature will send a low voltage to the ECU. The high temperature sends a voltage that is lower than the expected result for the ECU.The cause of this diagnostic trouble code is listed:
The oil temperature has reached 121° 8°C (250° 14°F).The possible causes of this diagnostic trouble code are listed:
Excessive oil temperatureSystem Response:The vehicle is safe when the temperature of the oil is below 121 °C (250 °F). Oil at this temperature is in the green area on the gauge. Operators should modify the operation of the vehicle in order to reduce the temperature of the oil as soon as possible when the temperature is between 121 °C (250 °F) and 149 °C (300 °F). Oil at this temperature is in the yellow area on the gauge. Operating a vehicle can result in damage to the transmission when the temperature of the oil is above 149 °C (300 °F). Oil at this temperature is in the red area on the gauge.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result:The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to test step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness or replace the machine harness. STOPTest Step 2. VERIFY THE TEMPERATURE OF THE OIL.Check the temperature of the oil.Results:
OK - The temperature of the oil is correct. Proceed to Test Step 3.
NOT OK - The temperature of the oil is not correct.Repair: Stop the engine until the oil temperature returns to an acceptable range.STOPTest Step 3. CHECK IF THE DIAGNOSTIC TROUBLE CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit.
Reconnect all harness connectors. Make sure that the harness connectors are fully seated and that the clips for each connector are completely fastened.
Turn the disconnect switch and the key start switch to the ON position.
Operate the vehicle.
Check the status of the SPN 3823 FMI 16.Expected Result:The SPN 3823 FMI 16 is active. Results:
YES - The SPN 3823 FMI 16 is active. The diagnostic trouble
Caterpillar parts catalog:
Parts thermostat Caterpillar catalog:
1032808
THERMOSTAT
315, D5C III
315, D5C III
3972598
THERMOSTAT
301.7D, 301.7D CR, 302.2D, 302.4D
301.7D, 301.7D CR, 302.2D, 302.4D
3735690
THERMOSTAT
300.9D, 301.4C, 302.7D
300.9D, 301.4C, 302.7D
303.5C, 303.5D, 303C CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR, 904B
2888576
THERMOSTAT AS
303.5C, 303.5D, 303C CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR
303.5C, 303.5D, 303C CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR
3589186
THERMOSTAT
304, 305, 305.5, 306, 306E
304, 305, 305.5, 306, 306E
2888055
THERMOSTAT
583T, 587T
583T, 587T