THERMOSTAT 5279194 - Caterpillar

Right - Move lever (6) to the right to move the secondary conveyor to the right.
Illustration 89 g03431460
Main and Right Side Consoles (7) Right side plate control switch (8) Rear Track steering lever (9) Secondary conveyor control leverRight Side Plate Control Switch (7)
Right Side Plate Control Switch (7) - Used to raise, lock, and float the right side plate.
Float - Right side plate control switch (7) is spring loaded and defaults to the center (FLOAT) position.
Raise - Turn switch (7) to the left to raise the right side plate, The light in the switch, the warning lights on the ground control panels and warning light on the side of the machine will flash to indicate the side plate is raising or is open. When switch (7) is released, switch (7) will return to the center position and the right side plate will lower fully down.
Lock - Turn switch (7) to the right to lock the right side plate in position. The light in the switch, the warning lights on the ground control panels and the side of the machine will flash to indicate the side plate is locked. When switch (7) is released, switch (7) will return to the center position. The side plate will remain locked. Note: When the Electric Circuits Enable Switch is first activated, the side plates are automatically in the LOCK mode. The side plate control switches must be cycled from the CENTER position to the RAISE position and released before the side plates will operate in the FLOAT mode.Rear Track Steering Lever (8)
Rear Track Steering Lever (8) - Steers the rear tracks. By combining rear track steering with front track steering, you can decrease the turning radius or crab steer the machine. Move lever (8) to the left to turn the front of the rear tracks to the left. Move lever (8) to the right to turn the front of the rear tracks to the right. Secondary Conveyor Control Lever (9)
Secondary Conveyor Control Lever (9) - Moves the conveyor to direct the flow of cut material from the end of the conveyor.
Raise - Move lever (9) upward to raise secondary conveyor.
Lower - Move lever (9) downward to lower the secondary conveyor.
Left - Move lever (9) to the left to move the secondary conveyor to the left.
Right - Move lever (9) to the right to move the secondary conveyor to the right.
Illustration 90 g03431476
Left, Main, and Right control console views (10) On / Stand-by Switch On / Stand-by Switch (10) ( For Machines Equipped with Side Operator Consoles )
On / Stand-By Switch (10) - The On / Stand-By Switch (10) puts machines into the Stand-by mode.
STAND-BY - Turn switch (10) counterclockwise to put the machine in STAND-BY mode.
ON - Turn switch (10) clockwise to return the machine to AUTOMATIC operation. The machine will return to operation at the current control settings. Note: The ON/STAND-BY switch is a momentary switch therefore it will return to its center position after it is released. Note: When the machine is