THERMOSTAT (W/90 FITTING) (Reference) AB00900003 - Caterpillar

Use the following information in Illustration 3 and Table 4 in order to manufacture item (3).
Illustration 3 g00935516
Table 4
Item     Dimension    
I    
12 mm (0.47 inch)    
J    
20 mm (0.8 inch)    
K     30° BEVEL    
L    
8 mm (0.3 inch)    
M    
150 mm (6 inch)    
N    
75 mm (3 inch)    
O    
8 mm (0.3 inch)    Use the following information in Illustration 4 and Table 5 in order to weld items (1), (2) and (3) together.
Illustration 4 g00935506
Table 5
Item     Dimension    
W1    
10 mm (0.4 inch) fillet weld    
W2    
10 mm (0.4 inch) fillet weld    
W3    
10 mm (0.4 inch) fillet weld    Installation of the New Tie Down Brackets
You should view the illustration below that matches your machine in order to determine the locations of the new tie down brackets. E7018 is the preferred welding rod for welding the new tie down brackets to the frame. E7024 welding rod may be used as an alternative for E7018 welding rod.Remove the battery cables. Remove or protect any hydraulic hoses that may be damaged by weld splatter.Use the following information in Illustration 6 and Table 6 in order to weld the new tie down bracket to the underside of the frame for the TH63.
Illustration 5 g00935523
The underside of the TH63 is shown.
Table 6
Item     Dimension    
W4    
8 mm (0.3 inch) fillet weld in 2 places.    
W5    
8 mm (0.3 inch) fillet weld in 2 places.    
W6    
10 mm (0.4 inch) fillet weld in 2 places    
W7    
8 mm (0.3 inch) fillet weld in 2 places.    Use the following information in Illustration 6 and Table 7 in order to weld the new tie down bracket to the underside of the frame for the TH83.
Illustration 6 g00935528
The underside of the TH83 is shown.
Table 7
Item     Dimension    
W8    
10 mm (0.4 inch) fillet weld in 2 places    
W9    
8 mm (0.3 inch) fillet weld in 2 places.    
W10    
8 mm (0.3 inch) fillet weld in 2 places.    
W11    
8 mm (0.3 inch) fillet weld in 2 places.    Use the following information in Illustration 7 and Table 8 in order to weld the new tie down bracket to the underside of the frame for the TH103.
Illustration 7 g00935530
The underside of the TH103 is shown.
Table 8
Item     Dimension    
W12    
8 mm (0.3 inch) fillet weld in 2 places.    
W13    
8 mm (0.3 inch) fillet weld in 2 places.    
W14    
8 mm (0.3 inch) fillet weld in 2 places.    
W15    
10 mm (0.4 inch) fillet weld in 2 places