THROTTLE AS 9Y5308 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 132-8223 Power Pack 1
132-8119 Hydraulic Torque Wrench Assembly 1 Note: The procedure to install the right hand final drive and the procedure to install the left hand final drive is identical. The procedure that follows is for one of the final drives.
Illustration 1 g00874660
Attach two lifting straps and a hoist to final drive (1). The weight of the final drive is approximately 1020 kg (2250 lb). It may be necessary to adjust the lifting straps for correct balance of the final drive. Position final drive (1) on the track roller frame. Note: The weight of the final drive must be adjusted if any other components are being installed with the final drive.
Illustration 2 g00874668
Illustration 3 g00874687Note: Make sure that Mounting Holes (Z) for the travel motor are aligned. This is necessary for the correct installation of the travel motor.
Use 9S-3263 Thread Lock Compound on bolts (2). Install bolts (2). Use Tooling (A) to tighten bolts (2) to a torque of 1800 200 N m (1328 148 lb ft). End By:
Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install".
Install the final drive sprocket. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".