THROWER-WATER 3N8444 - Caterpillar

3N8444 THROWER-WATER Caterpillar parts 3408, 3412, 3508, 3508C, 3512, 3516

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3N8444
3N-8444
3N8444

Weight: 0.04 pounds 0 kg.

Information:

ID 48 mm

MATERIAL RUBBER

RADIAL HEIGHT 16 mm

CS<br>STYLE RECT SQ

AXIAL WIDTH 3.17

Buy THROWER-WATER 3N8444 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, MARINE ENGINE,

This part in 2 request: Show. This information for suppliers only!

#707981 3n-8444

2021-08-26

#558826 3n-8444

2020-11-15

Compatible equipment models: 3N8444:

GEN SET ENGINE 3408 3412 3512 3516

INDUSTRIAL ENGINE 3408 3508 3512 3516

MARINE ENGINE 3408 3412 3508 3508C 3512 3516 Caterpillar

Number on catalog scheme: 4

Caterpillar 3N8444 Parts scheme THROWER-WATER

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-5230 Hand Hydraulic Pump 1
B - Loctite C5A Copper Anti- Seize 1 Start By:
Remove or lower the front guard, depending on which machine is being serviced.
Park the machine on a flat, level surface. Lower the blade to the ground. Chock the wheels in order to keep the machine from rolling when the parking brake is released.
Illustration 1 g03682183
Apply the parking brake from the cab in order to release the hydraulic pressure at parking brake actuator (2).
Disconnect hose assembly (1) from parking brake actuator (2).
Illustration 2 g03682190
Connect Tooling (A) to parking brake actuator (2), as shown. Use Tooling (A) to release the parking brake in order tol also release the pressure on the components that are shown in Illustration 3.
Illustration 3 g03682195
Remove the cotter pin and remove clevis pin (4).
Separate yoke assembly (5) from parking brake lever (6).
Remove nuts (3) and the washers. Remove parking brake actuator (2).
Illustration 4 g00546845
Turn Knob (B) on Tooling (A) in order to release the pressure in the parking brake actuator. Remove Tooling (A) from the parking brake actuator. Installation Procedure
Illustration 5 g03682195
Install parking brake actuator (2), the washers, and nuts (3).
Attach Tooling (A) to parking brake actuator (2).
Use Tooling (A) to apply pressure to parking brake actuator (2) in order to align yoke assembly (5) with parking brake lever (6).
Apply Tooling (B) to the bore in parking brake lever (6). Apply Tooling (B) to the bores in yoke assembly (5). Apply Tooling (B) to clevis pin (4).
Install clevis pin (4) and the cotter pin in order to connect yoke assembly (5) to parking brake lever (6).
Illustration 6 g00546845
Turn Knob (B) on Tooling (A) in order to release the pressure in the parking brake actuator. Remove Tooling (A) from the parking brake actuator.
Illustration 7 g03682183
Connect hose assembly (1) to parking brake actuator (2).
Adjust parking brake actuator (2). Refer to Testing and Adjusting, "Parking Brake Actuator - Adjust" for the proper adjustment of parking brake actuator (2). End By:
Install or raise the front guard, depending on which machine is being serviced.