THRUST HAMMER 0963416 - Caterpillar

The Machine is not Receiving Corrections from the Base Station
The base station receiver appears to be configured correctly but the machines receive no corrections.Probable Causes
The base station radio is not configured as a base radio.
There is a mismatch of the serial port settings between the base receiver and the base radio.
There is a mismatch in the network number ( TC900C) or frequency or wireless data rate ( TC450) between the base radio and the machines.
There is a problem with the radio cable for the base station.
There is not any power to the base radio.
There is a fault with the receiver or the radio.
There is a problem with the configuration of the receiver.
The machines are not within coverage of the radio.Isolate the Problem
Refer to the operation manual of the base station in order to verify that the base station is configured and functioning correctly.