TIE ROD GP 1326521 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock Compound 1
Illustration 1 g01401485
Install O-ring seal (18) on position sensor (1).
Illustration 2 g01401484
Install mounting block assembly (17) to plate (15) and install bolts (16).
Illustration 3 g01401483
Install shaft (14) and roll pin (13).
Illustration 4 g01401482
Install spacer (9), spring (10), and snap ring (11).
Install woodruff key (12).
Illustration 5 g01401481
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install torque arm (7) and tighten set screws (8).
Illustration 6 g01401480
Install roll pin (6).
Illustration 7 g01401479
Install plate (5), tubes (3), and bolts (3).
Illustration 8 g01401478
Apply Tooling (A) to bolts (2). Install position sensor (1) and bolts (2). Tighten bolts (2) to a torque of 1.0 .25 N m (9 2 lb in). End By:
Install the steering column. Refer to Disassembly and Assembly, "Steering Column - Install".