TIE ROD 1850022 - Caterpillar

1850022 TIE ROD Caterpillar parts H140CS, H140DS

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1850022
185-0022
1850022

Weight: 58 pounds 26 kg.

Buy TIE ROD 1850022 Caterpillar genuine, new aftermarket tractor parts with delivery
HAMMER,

Show more prices Caterpillar parts

Compatible equipment models: 1850022:

HAMMER H140CS H140DS Caterpillar

Number on catalog scheme: 9

Caterpillar 1850022 Parts scheme TIE ROD

For full view, you need register

Information:

Illustration 1 g02490436
Typical example
(1) Tighten the bolt to the following torque. ... 18 N m (13 lb ft)Piston Cooling Jet Alignment
Illustration 2 g01352578
(2) Piston cooling jet
(3) Rod
(4) Cylinder block Use the following procedure in order to check the alignment of the piston cooling jet.
Insert rod (3) into the end of the piston cooling jet (2). Rod (3) has a diameter of 1.70 mm (0.067 inch). Rod (3) must protrude out of the top of the cylinder block.
Dimension (A) is 50.75 mm (1.9980 inch) and dimension (B) is 9.35 mm (0.3681 inch). Dimension (A) and dimension (B) are tangential to the cylinder bore (4).
The position of the rod (3) must be within dimension (C). Dimension (C) is 14 mm (0.5512 inch). Note: Ensure that the rod (3) cannot damage the piston cooling jet when the alignment is checked. The piston cooling jets cannot be adjusted. If a piston cooling jet is not in alignment, the piston cooling jet must be replaced.