TIE ROD 3180467 - Caterpillar

Illustration 1 g00280510
Note: There are currently two types of cylinder head bolts that are being used. The first type is a full shank design that is shown in Illustration 2. The second type is a reduced shank design that is shown in Illustration 3.Note: Lubricate the bolt threads, the underside of the bolt heads, and the washers with 6V-4876 Lubricant prior to assembly.
Illustration 2 g00661561
Cylinder head bolt with full shank design (A) This is a reference dimension for the diameter of the shank of the cylinder head bolt. This bolt has a full shank diameter. ... 15.73 mm (0.619 inch)Use the following procedure in order to tighten the cylinder head bolts with the full shank design:
Tighten bolt (1) through bolt (26) in a numerical sequence.Tighten the bolts to the following torque. ... 150 15 N m (110