TILT CYLINDER GROUP 7J9675 - Caterpillar

Illustration 1 g06314268
Table 1
Item Qty Part Specification Description
1 1 114-0757 Bushing Outside diameter is 105.148 0.032 mm (4.1397 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
2 1 170-9847 Buffer Seal Lubricate the sealing lip lightly with lubricant that is being sealed.
3 1 216-0005 U-Cup Seal Lubricate the sealing lip lightly with lubricant that is being sealed.
4 1 165-9289 Lip Type Seal Lubricate the sealing lip lightly with lubricant that is being sealed.
5 - - Before assembly, apply green Loctite 609 to the wiper seal groove.
6 2 188-4217 Ring Lubricate inside diameter and out side diameter with clean grease.
7 1 9X-3601 Seal As Lubricate inside diameter and out side diameter with clean grease.
8 1 188-4218 Ring Lubricate inside diameter and out side diameter with clean grease.
A 1 365-4495 Cylinder As Bore is 150.05 0.10 mm (5.907 0.004 inch).
B 1 355-2673 Rod As Diameter is 99.930 0.038 mm (3.9342 0.0015 inch).
C 1 365-4494 Head Bore over two lands is 100.63 0.03 mm (3.962 0.001 inch).
9 1 1V-8242 Bushing Bore is 89.185 0.020 mm (3.5112 0.0008 inch).
Installation depth is 10.0 0.3 mm (0.39 0.01 inch).
10 1 1V-8242 Bushing Bore is 89.185 0.020 mm (3.5112 0.0008 inch).
Installation depth is 10.2 0.5 mm (0.40 0.02 inch).
11 1 123-2060 Locknut Before assembly, lubricate the face and threads with clean oil.
Torque to 7900 790 N m (5827 583 lb ft).
12 8 7Y-5215 Bolt Torque to 900 100 N m (664 74 lb ft).